7.19

Incoming Webhooks

Overview

WorkflowGen features an incoming webhook application that allows users to interact with WorkflowGen from external sources by exchanging JSON payloads using HTTP POST requests. The application supports multiple types of operations, such as creating a new request, completing an action, and some process deployment operations like creating a new process from an XPDL.

Technical requirements

In addition to the standard WorkflowGen installation, the following components are required:

For information on the installation procedure, see the WorkflowGen Technical Guide.

Configuration

Maximum query content length

The maximum query content length for incoming webhooks can be set by configuring the maxAllowedContentLength property in the WorkflowGen web.config file. The following example shows how to configure this property as 1 MB (note that the value should always be specified in bytes, so the value in the example is 1,024,000 bytes). The default value is 30,000,000 bytes.

<system.webServer> 
    <security> 
        <requestFiltering> 
            <requestLimits maxAllowedContentLength="1024000" /> 
        </requestFiltering> 
    </security> 
</system.webServer>

Input file allowed folders

You can configure the local or remote folder paths where files used by FILE type parameters are located using the Input file allowed folders setting In the Webhooks section on the Configuration Panel Integration tab. (Alternately, you can add the folder names separated by commas to the HooksInputFileAllowedFolders parameter in the WorkflowGen web.config file.)

When using file uploads, you don't need to include the original file folder.

To disallow input file allowed, leave this field empty (or the parameter undefined). To allow certain folders only, enter comma-separated values according to the table below:

Input file allowed HTTP URLs

You can configure allowed HTTP URLs for input files using the Input file allowed HTTP URLs setting in the Webhooks section on the Control Panel Integration tab. (Alternately, you can add the folder names separated by commas to the HooksInputFileAllowedHttpUrls parameter in the WorkflowGen web.config file.)

To disallow file uploads using HTTP and/or HTTPS URLs, leave the field empty (or the parameter undefined). To allow certain URLs only, enter comma-separated values according to the table below:

Maximum input file size

In the Webhooks section on the Integration tab in the Administration Module Configuration Panel, enter the maximum input file size in kilobytes in the Maximum input file size (kB) field.

Alternately, you can set the maximum input file content size in kilobytes as the value of the HooksMaxInputFileSize parameter in the WorkflowGen web.config file.

Maximum input file content size

When working with FILE type parameters content encoded in base64, you must enter the maximum input file content size in kilobytes in the Maximum input file content size (kB) field in the Webhooks section on the Integration tab in the Administration Module Configuration Panel.

Alternately, you can set the maximum input file content size in kilobytes as the value of the HooksMaxInputFileContentSize parameter in the WorkflowGen web.config file.

FILE type data content is only recommended for small files under 1 MB.

Performance tuning

WorkflowGen is installed with the following default webhooks settings (located under iisnode in \wfgen\hooks\web.config):

nodeProcessCountPerApplication="1"
maxConcurrentRequestsPerProcess="1024"

With these settings, only one node.exe instance will handle HTTP requests. This should be sufficient in most cases, but you can optimize performance if needed by adjusting these values based on the number of potential concurrent requests.

Creating an incoming webhook application

To create a new incoming webhook application in your WorkflowGen application, click the Add Application button on the Applications page. Then, choose Incoming webhook from the Application type drop-down list, enter the Name and Description, and click Save.

The Applications page will now display your incoming webhook application information, including the application URL. This is the URL you should use to send WorkflowGen incoming webhooks. The last component of this URL corresponds to a token that WorkflowGen will use to identify your incoming webhooks.

You should fill in the Impersonate username textbox with the WorkflowGen username you use to perform your desired operations. Be aware that your impersonated user must have your asked-operation-required rights to complete the action; if not, you will receive a security error on your response payload. As well, if the impersonate username is not set, the workflow engine service default identity will be used (as defined in the Security section on the Integration tab in the Configuration Panel).

  • The generated URL and its associated token must remain private and not exposed to end-users in client-side (in JavaScript, for example). You should treat the token with the same level of security as you would a password.

  • If the token used in the incoming webhook URL is missing or invalid, a 404 status code will be returned. If the associated user is invalid, archived, or inactive, a 403 status code will be returned. In both cases, the response will contain a descriptive error message.

Sending data in JSON

The incoming webhook application receives your HTTP POST request payload formatted as a JSON object.

Using the URL provided, you can post HTTP requests from external applications (e.g. Postman) to WorkflowGen in order to execute the available operations in your WorkflowGen application. For operations that require you to provide an object ID, the object ID value can be retrieved by using the GraphQL API. In most cases, object numbers can be used instead of IDs in operation payloads.

In case of an error, you will get a response payload providing error details such as:

{
  "error": "Advantys.Workflow.ServiceFacade: CreateRequest error: A process ID or name is required"
}

Curl example

The requests should respect the structure shown in this example, where operation refers to the name of the operation to execute, and args contains the input node that groups all of the request parameters to perform the operation.

To create a new request, the processName parameter is required. The processVersion parameter is optional and is used to find the correct process you want to use to create your request.

Request payload:

curl -u yourusername -X POST -H "Content-Type: application/json" -d '{
  "operation": "createRequest",
  "args": {
    "input": {
      "processName": "2_LEVELS_APPROVAL",
      "processVersion": 1
    }
  }
}' http://localhost/wfgen/hooks/yourtoken

Response payload:

The response payload will be structured as follows:

{
  "clientMutationId": null,
  "requestId": "UmVxdWVzdDoxNzI4",
  "number": 10,
  "onBehalfOf": null,
  "onBehalfOfUserName": null
}

Parameters

OpenAPI v2 endpoints

As of version 7.17.0, incoming webhooks now offer a new endpoint that supports the OpenAPI v2 specification for operation definitions and another endpoint for operation execution. This allows for seamless integration with other OpenAPI-ready solutions such as Swagger, Microsoft Flow, Azure Logic Apps and Postman.

Webhook operation definitions

Use this endpoint to retrieve webhook operation definitions based on the OpenAPI v2 specification (in JSON format).

URI: /wfgen/hooks/openapi/v2

Webhook operation execution

Use this endpoint to execute a webhook operation using HTTP POST, replacing :operation with the name of the incoming webhook operation (e.g. createRequest).

URI: /wfgen/hooks/operations/:operation

Required parameters

  • :operation: Name of the incoming webhook operation defined in the URI ✏️ Note: The operation name is not required inside the request payload.

  • x-wfgen-hooktoken: Webhook token value specified in the HTTP request header, which is the same token value as used in a classic incoming webhooks URL

Other required or optional parameters specific to the webhook operation might be needed.

Request operations

Create a new request

To create a new request from the webhooks API, make sure that sub-process mode is enabled with public access on the target process. (See the Process form section in the WorkflowGen Administration Guide for more information.)

Request payload:

{
  "operation": "createRequest",
  "args": {
    "input": {
      "processName": "2_LEVELS_APPROVAL",
      "processVersion": 1
    }
  }
}

Response payload:

{
  "clientMutationId": null,
  "requestId": "UmVxdWVzdDoxNzI4",
  "number": 1728,
  "onBehalfOf": null,
  "onBehalfOfUserName": null
}

A parameter's array can be included in the createRequest operation payload. Be aware that a data with the same name and data type must previously exist in the process for each parameter in the array to store the parameter's value. The following example shows how to send parameters corresponding to the four supported data types (TEXT, NUMERIC, DATETIME, and FILE).

Request payload:

{
  "operation": "createRequest",
  "args": {
    "input": {
      "processName": "2_LEVELS_APPROVAL",
      "processVersion": 1,
      "parameters": [
        {
          "name": "TEXT",
          "textValue": "My text parameter"
        },
        {
          "name": "NUMERIC",
          "numericValue": 5
        },
        {
          "name": "DATE",
          "dateTimeValue": "2017-02-23T20:46:00Z"
        },
        {
          "name": "FILE", 
          "fileValue": {
            "name": "TestFile.txt",
            "contentType": "text/plain",
            "size": 616,
            "url": "file:///c:/TestFile.txt",
            "updatedAt": "2017-02-21T15:06:38Z"
          }
        }
      ]
    }
  }
}

Response payload:

{
  "clientMutationId": null,
  "requestId": "UmVxdWVzdDoxNzY1",
  "number": 1765,
  "onBehalfOf": null,
  "onBehalfOfUserName": null
}

Properties

Update a request dataset

A request dataset context can be updated by adding a parameter array. In this case a request number or a request ID should be provided.

This operation requires users to have system access to perform it. This can be configured in the System operations allowed users field under Security on the Integration tab in the Configuration Panel.

Request payloads:

{
  "operation": "updateRequestDataset",
  "args": {
    "input": {
      "number": 1750,
      "parameters": [
        {
          "name": "NEW_PARAMETER",
          "textValue": "My parameter"
        }
      ]
    }
  }
}
{
  "operation": "updateRequestDataset",
  "args": {
    "input": {
      "id": "UmVxdWVzdDoxMDAw",
      "parameters": [
        {
          "name": "NEW_PARAMETER",
          "textValue": "My parameter"
        }
      ]
    }
  }
}

Response payload:

{
  "clientMutationId": null,
  "requestId": "UmVxdWVzdDoxNzIx",
  "parameters": [
    {
      "name": "NEW_PARAMETER",
      "textValue": "My parameter"
    }
  ]
}

For more information on FILE parameter manipulations when sent within incoming webhook payloads, see the File upload section.

Properties

Cancel a request

You can cancel a request by using the request number or the request ID.

Request payloads:

{
  "operation": "cancelRequest",
  "args": {
    "input": {
      "number": 1728
    }
  }
}
{
  "operation": "cancelRequest",
  "args": {
    "input": {
      "id": "UmVxdWVzdDoxNzI4"
    }
  }
}

Response payload:

{
  "clientMutationId": null,
  "requestId": "UmVxdWVzdDoxNzI4",
  "number": 1728,
  "onBehalfOf": null,
  "onBehalfOfUserName": null
}

Properties

Delete a request

A request can be deleted by using the request number or the request ID.

Request payloads:

{
  "operation": "deleteRequest",
  "args": {
    "input": {
      "number": 1728
    }
  }
}
{
  "operation": "deleteRequest",
  "args": {
    "input": {
      "id": "UmVxdWVzdDoxNzI4"
    }
  }
}

Response payload:

{
  "clientMutationId": null
}

Properties

Action operations

Complete an action

To complete an action, provide the request number and the action number, or the action ID.

Request payloads:

{
  "operation": "completeAction",
  "args": {
    "input": {
      "requestNumber": 1765,
      "number": 1,
      "parameters": [
        {
          "name": "NEW_PARAMETER",
          "textValue": "My parameter"
        }
      ]
    }
  }
}
{
  "operation": "completeAction",
  "args": {
    "input": {
      "id": "QWN0aW9uOjE3NTktLS0x"
    }
  }
}

Response payload:

{
  "clientMutationId": null,
  "actionId": "QWN0aW9uOjE3NTktLS0x",
  "number": 1,
  "requestNumber": 1759,
  "onBehalfOf": null,
  "onBehalfOfUserName": null
}

To complete an action, a parameter array can be included in the request payload arguments.

Request payload:

{
  "operation": "completeAction",
  "args": {
    "input": {
      "requestNumber": 1765,
      "number": 1,
      "parameters": [
        {
          "name": "NEW_PARAMETER",
          "direction": "IN",
          "type": "TEXT",
          "textValue": "My parameter"
        }
      ]
    }
  }
}

Response payload:

{
  "clientMutationId": null,
  "actionId": "QWN0aW9uOjE3NjUtLS0x",
  "number": 1,
  "requestNumber": 1765,
  "onBehalfOf": null,
  "onBehalfOfUserName": null
}

Properties

Complete a form action

Request payload:

{
  "operation": "completeFormAction",
  "args": {
    "input": {
      "requestNumber": 1765,
      "number": 1,
      "parameters": [
        {
          "name": "NEW_PARAMETER",
          "textValue": "My parameter"
        }
      ]
    }
  }
}

Response payload:

{
  "clientMutationId": null,
  "actionId": "QWN0aW9uOjE3NjUtLS0x",
  "number": 1,
  "requestNumber": 1765,
  "onBehalfOf": null,
  "onBehalfOfUserName": null
}

Properties

Cancel an action

To cancel an action, provide the request number and the action number, or the action ID. The following conditions must be met:

  • The viewer and the user (if they don't share the same identity, as in delegation mode) must have access to the request.

  • The action must be open.

  • The action must have a cancel or default exception defined in the transition.

  • The viewer is:

    • an administrator or process folder manager OR

    • a supervisor with cancellation rights OR

    • the action assignee.

Request payloads:

{
  "operation": "cancelAction",
  "args": {
    "input": {
      "requestNumber": 1759,
      "number": 2
    }
  }
}
{
  "operation": "cancelAction",
  "args": {
    "input": {
      "id": "QWN0aW9uOjEwMDAtLS0x"
    }
  }
}

Response payload:

{
  "clientMutationId": null,
  "actionId": "QWN0aW9uOjE3NTktLS0y",
  "number": 2,
  "requestNumber": 1759,
  "onBehalfOf": null,
  "onBehalfOfUserName": null
}

Properties

Cancel a request's actions by name

All of the actions with the same name in a request can be cancelled at the same time by using their name in this operation payload. The following conditions are met:

  • The viewer and the user (if they do not share the same identity, as in delegation mode) must have access to the request.

  • The action must be open.

  • The action must have a cancel or default exception defined in the transition.

  • The viewer is:

    • an administrator or a process folder manager OR

    • a supervisor with cancellation rights OR

    • the action assignee.

Request payload:

{
  "operation": "cancelRequestActionsByName",
  "args": {
    "input": {
      "requestNumber": 4399,
      "activityName": "Initiates"
    }
  }
}

Response payload:

{
  "clientMutationId": null,
  "actionIds": [
    "QWN0aW9uOjQzOTktLS0x",
    "QWN0aW9uOjQzOTktLS0y",
    "QWN0aW9uOjQzOTktLS0z"
  ],
  "onBehalfOf": null,
  "onBehalfOfUserName": null
}

Properties

Assign an action

To assign an action, provide the request number and the action number, or the action ID; you must also provide the assigneeUserName or the assigneeId.

Request payloads:

{
  "operation": "assignAction",
  "args": {
    "input": {
      "requestNumber": 1751,
      "number": 2,
      "assigneeUserName": "johnsmith"
    }
  }
}
{
  "operation": "assignAction",
  "args": {
    "input": {
      "id": "QWN0aW9uOjEwMDAtLS0x",
      "assigneeId": "QXNzaWduZWU6MQ=="
    }
  }
}

Response payload:

{
  "clientMutationId": null,
  "actionId": "QWN0aW9uOjE3NTEtLS0y",
  "number": 2,
  "requestNumber": 1751,
  "onBehalfOf": null,
  "onBehalfOfUserName": null
}

Properties

Cancel an action assignment

To cancel an action assignment, you should provide the request number and the action number, or the action ID.

Request payloads:

{
  "operation": "cancelActionAssignment",
  "args": {
    "input": {
      "requestNumber": 1751,
      "number": 2
    }
  }
}
{
  "operation": "cancelActionAssignment",
  "args": {
    "input": {
      "id": "QWN0aW9uOjEwMDAtLS0x"
    }
  }
}

Response payload:

{
  "clientMutationId": null,
  "actionId": "QWN0aW9uOjE3NTEtLS0y",
  "number": 2,
  "requestNumber": 1751,
  "onBehalfOf": null,
  "onBehalfOfUserName": null
}

Properties

End-user operations

Create a new favorite

The incoming webhook application lets users add processes and views to their favorites lists using the process or view IDs.

Request payload:

{
  "operation": "createFavorite",
  "args": {
    "input": {
      "itemId": "UHJvY2VzczoxMTA="
    }
  }
}

The above code will create a favorite using the process or view description, but adding a custom description is also possible, as shown in the following example:

Request payload:

{
  "operation": "createFavorite",
  "args": {
    "input": {
      "itemId": "UHJvY2VzczoxMTA=",
      "description": "My custom description"
    }
  }
}

Response payload:

{
  "clientMutationId": null,
  "favoriteId": "RmF2b3JpdGU6MTQ="
}

Properties

Update a favorite

The incoming webhook application lets users update an existing favorite process or view by using its favorite ID.

Request payload:

{
  "operation": "updateFavorite",
  "args": {
    "input": {
      "id": "RmF2b3JpdGU6MTQ=",
      "description": "Updated description"
    }
  }
}

Response payload:

{
  "clientMutationId": null,
  "favoriteId": "RmF2b3JpdGU6MTQ="
}

Properties

Delete a favorite

The incoming webhook application lets users delete an existing favorite process or view from their favorites list by using its favorites ID.

Request payload:

{
  "operation": "deleteFavorite",
  "args": {
    "input": {
      "id": "RmF2b3JpdGU6MTQ="
    }
  }
}

Response payload:

{
  "clientMutationId": null
}

Properties

Add a comment

The incoming webhook application lets users add comments to requests.

Request payload:

{
  "operation": "addComment",
  "args": {
    "input": {
      "subjectId": "UmVxdWVzdDo0MzY1",
      "message": "This is my comment"
    }
  }
}

Response payload:

{
  "clientMutationId": null,
  "commentId": "Q29tbWVudDo0MzY1LS0tMg=="
}

Properties

Update a comment

Users can update comments if they are administrators, process manager of the process or process supervisor, or standard users who are members of the process participants, have write permissions, and are the comment author.

Request payload:

 {
    "operation": "updateComment",
    "args": {
    "input": {
      "id": "Q29tbWVudDo0MzY1LS0tMg==",
      "message": "This is my updated comment"
    }
  }
}

Response payload:

{
  "clientMutationId": null,
  "commentId": "Q29tbWVudDo0MzY1LS0tMg=="
}

Properties

Remove a comment

The incoming webhook application lets users remove comments from requests.

Request payload:

{
  "operation": "removeComment",
  "args": {
    "input": {
      "id": "Q29tbWVudDo0MzY1LS0tMg=="
    }
  }
}

Response payload:

{
  "clientMutationId": null
}

Properties

Category operations

Create a new category

Only administrators can create a category.

Request payload:

{
  "operation": "createCategory",
  "args": {
    "input": {
      "name": "Human resources",
      "description": "Human resources category"
    }
  }
}

Response payload:

{
  "clientMutationId": null,
  "categoryId": "Q2F0ZWdvcnk6Mg=="
}

Properties

Update a category

Only administrators can update a category.

Request payload:

{
  "operation": "updateCategory",
  "args": {
    "input": {
      "id":  "Q2F0ZWdvcnk6Mg==",
      "name": "My category updated name"
    }
  }
}

Response payload:

{
  "clientMutationId": null,
  "categoryId": "Q2F0ZWdvcnk6Mg=="
}

Properties

Delete a category

Only administrators can delete a category.

Request payload:

{
  "operation": "deleteCategory",
  "args": {
    "input": {
      "id":  "Q2F0ZWdvcnk6Mg=="
    }
  }
}

Response payload:

{
  "clientMutationId": null
}

Properties

Process folder operations

Create a new process folder

Only administrators can create a process folder.

Request payload:

{
  "operation": "createProcessFolder",
  "args": {
    "input": {
      "name": "Human Resources processes folder",
      "description": "Human Resources processes folder",
      "managerId": "R2xvYmFsUGFydGljaXBhbnQ6MQ=="
    }
  }
}

Response payload:

{
  "clientMutationId": null,
  "processFolderId": "UHJvY2Vzc0ZvbGRlcjoz"
}

Properties

Update a process folder

Only administrators and the process folder manager can update a process folder.

Request payload:

{
  "operation": "updateProcessFolder",
  "args": {
    "input": {
      "id": "UHJvY2Vzc0ZvbGRlcjoz",
      "name": "Updated process folder name"
    }
  }
}

Response payload:

{
  "clientMutationId": null,
  "processFolderId": "UHJvY2Vzc0ZvbGRlcjoz"
}

Properties

Delete a process folder

Only administrators can delete a process folder.

Request payload:

{
  "operation": "deleteProcessFolder",
  "args": {
    "input": {
      "id":  "UHJvY2Vzc0ZvbGRlcjoz"
    }
  }
}

Response payload:

{
  "clientMutationId": null
}

Properties

Process operations

Create a new process

This operation creates a process from the process properties. The process name, description, and folder identifier or name are required.

Request payloads:

{
  "operation": "createProcess",
  "args": {
    "input": {
      "description": "My new process",
      "folderName": "DEFAULT",
      "name": "My new process"
    }
  }
}
{
  "operation": "createProcess",
  "args": {
    "input": {
      "fromProcessId": "UHJvY2Vzczoy"
    }
  }
}

Response payload:

{
  "clientMutationId": null,
  "processId": "UHJvY2Vzczoy"
}

Properties

Create a new process from an XPDL

A process can be created from its XPDL definition.

Request payload:

{
  "operation": "createProcessFromXpdl",
  "args": {
    "input": {
      "addNewParticipantsAsGlobal": false,
      "addSelfToParticipant": true,
      "description": "My new process",
      "folderName": "DEFAULT",
      "name": "My new process",
      "xpdl": {
        "contentType": "text/xml",
        "name": "process.xml",
        "size": 123,
        "updatedAt": "2017-03-15T15:02:00Z",
        "url": "file:///c:/temp/process.xml"
      }
    }
  }
}

Response payload:

{
  "clientMutationId": null,
  "processId": "UHJvY2Vzczoy"
}

Properties

Update a process

This operation updates process properties from the process identifier.

Request payload:

{
  "operation": "updateProcess",
  "args": {
    "input": {
      "id": "UHJvY2Vzczoy",
      "name": "New name"
    }
  }
}

Response payload:

{
  "clientMutationId": null,
  "processId": "UHJvY2Vzczoy"
}

Properties

Update a process from an XPDL

A process can be updated from its XPDL definition. The .xml file is uploaded by using the multipart file upload feature as shown below.

Request payload:

{
  "operation": "updateProcessFromXpdl",
  "args": {
    "input": {
      "id": "UHJvY2Vzczoy",
      "xpdl": {
        "contentType": "text/xml",
        "name": "process.xml",
        "size": 123,
        "updatedAt": "2017-03-15T15:02:00Z",
        "url": "file:///c:/temp/process.xml"
      }
    }
  }
}

Response payload:

{
  "clientMutationId": null,
  "processId": "UHJvY2Vzczoy"
}

Properties

Delete a process

A process can be deleted by using the process identifier.

Request payload:

{
  "operation": "deleteProcess",
  "args": {
    "input": {
      "id": "UHJvY2Vzczoy"
    }
  }
}

Response payload:

{
  "clientMutationId": null
}

Properties

Participant operations

Create a new global participant

Request payload:

{

  "operation": "createGlobalParticipant",

  "args": {

    "input": {

      "name": "My global participant",

      "description": "My global participant description",

      "type": "COORDINATOR",

      "userIds": ["VXNlcjox", "VXNlcjoy"],
      "groupIds": ["R3JvdXA6MQ=="],

      "directoryIds": ["RGlyZWN0b3J5OjE="],
      "coordinatorIds": ["VXNlcjoy"]
    }
  }
}

Response payload:

{
  "clientMutationId": null,
  "participantId": "R2xvYmFsUGFydGljaXBhbnQ6MQ=="
}

Properties

Update a global participant

Request payload:

{
  "operation": "updateGlobalParticipant",
  "args": {
    "input": {
      "id": "R2xvYmFsUGFydGljaXBhbnQ6MQ=="
      "name": "My global participant",
      "description": "My global participant description",
      "type": "COORDINATOR",
      "userIds": ["VXNlcjox", "VXNlcjoy"],
      "groupIds": ["R3JvdXA6MQ=="],
      "directoryIds": ["RGlyZWN0b3J5OjE="],
      "coordinatorIds": ["VXNlcjoy"]
    }
  }
}

Response payload:

{
  "clientMutationId": null,
  "participantId": "R2xvYmFsUGFydGljaXBhbnQ6MQ=="
}

Properties

Delete a global participant

Request payload:

{
  "operation": "deleteGlobalParticipant",
  "args": {
    "input": {
      "id": "R2xvYmFsUGFydGljaXBhbnQ6MQ=="
    }
  }
}

Response payload:

{
  "clientMutationId": null
}

Properties

Add a new process participant profile

To be used with global participant only.

Request payload:

{
  "operation": "addProcessParticipantProfile",
  "args": {
    "input": {
      "role": "ACTOR"
      "participantId": "R2xvYmFsUGFydGljaXBhbnQ6NQ==",
      "processId": "UHJvY2Vzczox"
    }
  }
}

Response payload:

{
  "clientMutationId": null,
  "processParticipantProfileId": "UHJvY2Vzc1BhcnRpY2lwYW50UHJvZmlsZToxLS0tMTE="
}

Properties

Update a process participant profile

To be used with global participant only.

Request payload:

{
  "operation": "addProcessParticipantProfile",
  "args": {
    "input": {
      "role": "SUPERVISOR",
      "id": "UHJvY2Vzc1BhcnRpY2lwYW50UHJvZmlsZToxLS0tMTE="
    }
  }
}

Response payload:

{
  "clientMutationId": null,
  "processParticipantProfileId": "UHJvY2Vzc1BhcnRpY2lwYW50UHJvZmlsZToxLS0tMTE="
}

Properties

Remove a process participant profile

To be used with global participant only.

Request payload:

{
  "operation": "removeProcessParticipantProfile",
  "args": {
    "input": {
      "id": "UHJvY2Vzc1BhcnRpY2lwYW50UHJvZmlsZToxLS0tMTE="
    }
  }
}

Response payload:

{
  "clientMutationId": null
}

Properties

Create a new local process participant

Request payload:

{
  "operation": "createLocalProcessParticipant",
  "args": {
    "input": {
      "name": "My local process participant",
      "description": "My local process participant description",
      "type": "COORDINATOR",
      "userIds": ["VXNlcjox", "VXNlcjoy"],
      "groupIds": ["R3JvdXA6MQ=="],
      "directoryIds": ["RGlyZWN0b3J5OjE="],
      "coordinatorIds": ["VXNlcjoy"],
      "processId": "UHJvY2Vzczoy"
    }
  }
}

Response payload:

{
  "clientMutationId": null,
  "participantId": "TG9jYWxQcm9jZXNzUGFydGljaXBhbnQ6MTI="
}

Properties

Update a local process participant

Request payload:

{
  "operation": "updateLocalProcessParticipant",
  "args": {
    "input": {
      "id": "TG9jYWxQcm9jZXNzUGFydGljaXBhbnQ6MTI="
      "name": "My local process participant",
      "description": "My local process participant description",
      "type": "COORDINATOR",
      "userIds": ["VXNlcjox", "VXNlcjoy"],
      "groupIds": ["R3JvdXA6MQ=="],
      "directoryIds": ["RGlyZWN0b3J5OjE="],
      "coordinatorIds": ["VXNlcjoy"]
    }
  }
}

Response payload:

{
  "clientMutationId": null,
  "participantId": "TG9jYWxQcm9jZXNzUGFydGljaXBhbnQ6MTI="
}

Properties

Delete a local process participant

Request payload:

{
  "operation": "deleteLocalProcessParticipant",
  "args": {
    "input": {
      "id": "TG9jYWxQcm9jZXNzUGFydGljaXBhbnQ6MTI="
    }
  }
}

Response payload:

{
  "clientMutationId": null
}

Properties

Application operations

Create an application

Only administrators can create a workflow application.

Request payload:

{
  "operation": "createApplication",
  "args": {
    "input": {
      "name": "My assembly application",
      "description": "My assembly application description",
      "type": "ASSEMBLY",
      "assemblyName": "CustomAssembly.Applications",
      "assemblyClassName": "CustomAssembly.Applications.Converters",
      "method": "Convert",
      "isDefault": false,
      "isActive": true
    }
  }
}

Response payload:

{
  "clientMutationId": null,
  "applicationId": "QXBwbGljYXRpb246Mzk="
}

Properties

Update an application

Only administrators can update a workflow application.

Request payload:

{
  "operation": "updateApplication",
  "args": {
    "input": {
      "id":  "QXBwbGljYXRpb246Mzk=",
      "name": "My assembly application name"
     }
  }
}

Response payload:

{
  "clientMutationId": null,
  "applicationId": "QXBwbGljYXRpb246Mzk="
}

Properties

Delete an application

Only administrators can delete a workflow application.

Request payload:

{
  "operation": "deleteApplication",
  "args": {
    "input": {
      "id":  "QXBwbGljYXRpb246Mzk="
    }
  }
}

Response payload:

{
  "clientMutationId": null
}

Properties

Add an application parameter

Only administrators can add a workflow application parameter.

Request payload:

{
  "operation": "addApplicationParameter",
  "args": {
    "input": {
      "applicationId": "QXBwbGljYXRpb246MjA=",
      "name": "My parameter",
      "description": "My parameter description",
      "dataType": "TEXT",
      "direction": "IN",
      "isRequired": true,
      "isDefault": false
    }
  }
}

Response payload:

{
  "clientMutationId": null,
  "parameterId": "QXBwbGljYXRpb25QYXJhbWV0ZXI6MjAtLS02"
}

Properties

Remove an application parameter

Only administrators can remove a workflow application parameter if it is not associated to any activity and is not required.

Request payload:

{
  "operation": "removeApplicationParameter",
  "args": {
    "input": {
      "id": "QXBwbGljYXRpb25QYXJhbWV0ZXI6MjAtLS02"
    }
  }
}

Response payload:

{
  "clientMutationId": null
}

Properties

Global list operations

Create a global list

The operation creates a global list from the global list's properties. If no input argument is provided, the global list is created with the default values.

Request payloads:

{
  "operation": "createGlobalList",
  "args": {
    "input": {
      "connectionName": "WfgenDatabase",
      "name": "USER_LIST",
      "providerName": "SYSTEM_DATA_SQLCLIENT",
      "selectCommand": "SELECT USERNAME, LASTNAME, FIRSTNAME FROM USERS"
    }
  }
}
{
  "operation": "createGlobalList",
  "args": {
    "input": {
      "fromGlobalListId": "R2xvYmFsTGlzdDoxMw=="
    }
  }
}

Response payload:

{
  "clientMutationId": null,
  "globalListId": "R2xvYmFsTGlzdDoxMw=="
}

Properties

Create a global list from an XML definition

A global list can be created from its XML definition. The .xml file is uploaded by using the multipart file upload feature as shown below.

Request payload:

{
  "operation": "createGlobalListFromXmlDefinition",
  "args": {
    "input": {
      "xmlDefinition": {
        "contentType": "text/xml",
        "name": "list.xml",
        "size": 123,
        "updatedAt": "2017-03-15T15:02:00Z",
        "url": "file:///c:/temp/list.xml"
      }
    }
  }
}

Response payload:

{
  "clientMutationId": null,
  "globalListId": "R2xvYmFsTGlzdDoxMw=="
}

Properties

Update a global list

Request payload:

{
  "operation": "updateGlobalList",
  "args": {
    "input": {
      "id": "R2xvYmFsTGlzdDoxMw==",
      "name": "New list name"
    }
  }
}

Response payload:

{
  "clientMutationId": null,
  "globalListId": "R2xvYmFsTGlzdDoxMw=="
}

Properties

Update a global list from an XML definition

A global list can be updated from its XML definition. The .xml file is uploaded by using the multipart file upload feature as shown below.

Request payload:

{
  "operation": "updateGlobalListFromXmlDefinition",
  "args": {
    "input": {
      "id": "R2xvYmFsTGlzdDoxMw==",
      "xmlDefinition": {
        "contentType": "text/xml",
        "name": "list.xml",
        "size": 123,
        "updatedAt": "2017-03-15T15:02:00Z",
        "url": "file:///c:/temp/list.xml"
      }
    }
  }
}

Response payload:

{
  "clientMutationId": null,
  "globalListId": "R2xvYmFsTGlzdDoxMw=="
}

Properties

Delete a global list

Request payload:

{
  "operation": "deleteGlobalList",
  "args": {
    "input": {
      "id": "W0dsb2JhbExpc3Q6MV0="
    }
  }
}

Response payload:

{
  "clientMutationId": null
}

Properties

Parameter definitions

These parameters define single data values used in the Create a new request, Update a request dataset, Complete an action, and Complete a form action operations.

Operation values

File values

File upload

As of version 7.2.0, the incoming webhook application supports the fileValue.updatedAt, fileValue.content, and fileValue.url fields when sending FILE parameters (as shown in the previous example).

The fileValue.updatedAt field should use the ISO 8601 date format.

File content

The fileValue.content field should contain the file content encoded in base64. In this case, the fileValue.url field is not required. You must set the maximum input file content size (see the Configuration section above for instructions on how to set these).

...
{
  "name": "FILE",
  "fileValue": {
    "name": "test.txt",
    "contentType": "plain/text",
    "size": 76,
    "updatedAt": "2017-03-15T15:02:00Z",                
    "content": "TG9yZW0gaXBzdW0gZG9sb3Igc2l0IGFtZXQsIGNvbnNlY3RldHVyIGFkaXBpc2NpbmcgZWxpdC4="
  }
}
...

File URL

The fileValue.url field contains the file URL. When working with FILE parameters, you must set the input file allowed folders and the maximum input file size (see the Configuration section above for instructions on how to set these).

You can also prevent file uploads using HTTP and/or HTTPS URLs setting the Input file allowed HTTP URLs in the Webhooks section on the Integration tab in the Administration Module Configuration Panel (see Input file allowed HTTP URLs in the WorkflowGen Administration Guide).

The following path patterns are supported:

  • Local file should use the File URI scheme:

    ...
{
  "name": "FILE",
  "fileValue": {
    "name": "test.txt",
    "description": "test.txt",
    "contentType": "plain/text",
    "url": "file:///c:/temp/test.txt",
    "size": 4714,
    "updatedAt": "2017-03-15T15:02:00Z"
  }
}
...

  • Public file URL:

    ...
{
  "name": "FILE",
  "fileValue": {
    "name": "update.zip",
    "description": "update.zip",
    "contentType": "application/zip",
    "url": "http://download.workflowgen.com/product/latest/update.zip",
    "size": 4120858,
    "updatedAt": "2017-03-15T15:02:00Z"
  }
}   
...

  • File URL:

    ...
{
  "name": "FILE",
  "fileValue": {
    "name": "test.txt",
    "description": "test.txt",
    "contentType": "plain/text",
    "url": "http://localhost:8081/test.txt",
    "size": 4714,
    "updatedAt": "2017-03-15T15:02:00Z"
  }
}
...

Multipart file upload

Incoming webhooks support multipart file uploads for the following mutations:

  • createRequest

  • completeAction

  • completeFormAction

  • updateRequestDataset

  • createProcessFromXpdl

  • updateProcessFromXpdl

  • createGlobalListFromXmlDefinition

  • updateGlobalListFromXmlDefinition

📌 Curl example for a single upload

curl -X
    POST http://localhost/wfgen/hooks/TOKENXXXXXXXXXXXXX 
    -H 'content-type:multipart/form-data'
    -F "payload={\"operation\": \"createRequest\", \"args\": { \"input\": {\"processName\": \"SIMPLE_REQUEST\", \"processVersion\": 1, \"parameters\": [ { \"name\": \"FILE1\", \"fileValue\": {\"uploadMap\":\"1\" }}] } } }" 
    -F "1=@C:\test1.txt"

  • The content type should be multipart/form-data.

  • The payload field is required and contains the operation and its arguments.

    • input.parameters[X].fileValue should contain an uploadMap whose value is the (\"fileValue\": {\"uploadMap\":\"1\" }) key of the file to be uploaded.

    • The key should be an alphanumeric string that matches the file key ("1" in the above example).

    • For each uploadMap declared, a file with the same key must be attached.

  • Each file to be uploaded should contain the alphanumeric key and the file path ("1=@C:\test1.txt").

    • Each attached file must match an uploadMap.

    • The files should follow the payload part.

📌 Curl example for multiple uploads

curl -X
    POST http://localhost/wfgen/hooks/TOKENXXXXXXXXXXXXX \
    -H 'content-type:multipart/form-data' \
    -F "payload={\"operation\": \"createRequest\", \"args\": { \"input\": {\"processName\": \"SIMPLE_REQUEST\", \"processVersion\": 1, \"parameters\": [ { \"name\": \"FILE1\", \"fileValue\": {\"uploadMap\":\"1\" }}, { \"name\": \"FILE2\", \"fileValue\": {\"uploadMap\":\"2\" }}] } } }" \
    -F "1=@C:\test1.txt" \
    -F "2=@C:\test2.txt"

Limits

  • The maximum number of uploads in the same request is 30.

  • The maximum file upload size is set in the HooksMaxInputFileSize configuration parameter.

The multipart/form-data content type is only advised for HTTP requests with file uploads. If the fileValue.name, fileValue.description, fileValue.contentType, and fileValue.size properties are not defined, they will be set from the uploaded file information; otherwise, they will take the values defined the payload.

Delegation mode

Some of these operations can be done in delegation mode, by adding the onBehalfOfUserName (delegator username) or the onBehalfOf (delegator ID) arguments to the request JSON payload, such as in the following example:

Request payloads:

{
  "operation": "createRequest",
  "args": {
    "input": {
      "processName": "2_LEVELS_APPROVAL",
      "processVersion": 1,
      "onBehalfOfUserName": "wfgen_admin"
    }
  }
}
{
  "operation": "createRequest",
  "args": {
    "input": {
      "processName": "2_LEVELS_APPROVAL",
      "processVersion": 1,
      "onBehalfOf": "VXNlcjox"
    }
  }
}

In this case, the response payload will also contain the onBehalfOf and onBehalfOfUserName arguments.

{
  "clientMutationId": null,
  "requestId": "UmVxdWVzdDoxNzI5",
  "number": 1729,
  "onBehalfOf": "VXNlcjox",
  "onBehalfOfUserName": "wfgen_admin"
}

In the case of CancelActionAssignment and UpdateRequestDataset operations, the delegation mode is not supported.

clientMutationId

clientMutationId is an optional argument that can be used by the requester to identify the execution of an operation. Its value is defined in the input payload (e.g. a UUID). If defined, the same value is returned by the operation.

Request payload:

{
  "operation": "createRequest",
  "args": {
    "input": {
      "processName": "2_LEVELS_APPROVAL",
      "processVersion": 1,
      "clientMutationId": "e9468d12-ca3e-4164-ba6c-2bb0843117d0"
    }
  }
}

Response payload:

{
  "clientMutationId": "e9468d12-ca3e-4164-ba6c-2bb0843117d0",
  "requestId": "UmVxdWVzdDoxNzY4",
  "number": 1768,
  "onBehalfOf": null,
  "onBehalfOfUserName": null
}

Known limitations

For file type data parameters, the URL must start with file://, and the path has to be available to the WorkflowGen server.

Performance optimization

The value of the nodeProcessCountPerApplication setting is set to 0 by default for the best performance in Node.js applications. This creates one node process based on the number of virtual processors that are configured. You can change this value at any time to a custom number of node processes; for example, nodeProcessCountPerApplication=2 will create two node processes independently of the number of virtual processors.

For more information, see https://docs.microsoft.com/en-us/azure/app-service/app-service-web-nodejs-best-practices-and-troubleshoot-guide#nodeprocesscountperapplication.

PreviousWeb Services APINextOutgoing Webhooks

Last updated